ASRock X570 Pro4, AM4, DDR4, ATX, Motherboard

ASRock X570 Pro4, AMD X570, AM4, DDR4, PCIe 4.0, Dual M.2, 2-Way CrossFire, Intel GbE, USB 3.2 Gen2 A+C, ATX

• Edition - X570 Pro4
• Form Factor - ATX
• CPU Socket - AM4
• Chipset - AMD X570
• Memory Type - DDR4
• Memory Channel - Dual (2)
• Memory Type (ECC) - ECC/Non-ECC
• Memory Type (R/U) - UDIMM (Unbuffered)
• Memory Speed (Mhz):
• DDR4 - 2133
• DDR4 - 2400
• DDR4 - 2666
• DDR4 - 2933
• DDR4 - 3200
• DDR4 - 3466(OC)
• DDR4 - 4066+(OC)
• Max. Memory Capacity - 64GB (4x16GB)
• Audio - Realtek ALC1200 7.1 HD Audio
• Primary GPU Interface - PCIe 4.0 (x16) [PCIe 3.0 Backwards Compatible]
• NVIDIA SLI Support - Not Supported
• AMD CrossFire Support - 2-Way CrossFire
• Integrated Graphics - Requires Processor Graphics or Discrete GPU
• On-Board Graphics Connectors:
• DisplayPort 1.2
• HDMI 1.4
• Expansion Slots:
• 1 x M.2 Key E (Supports Wi-Fi modules)
• 1 x M.2, 22-30/42/60/80/110, PCIe Gen4x4
• 1 x M.2, 22-30/42/60/80/110, PCIe Gen4x4/SATA3
• 2 x PCIe 4.0 x1
• 1 x PCIe 4.0 x16
• 1 x PCIe 4.0 x16 (x4 Bandwidth)
• SATA Support - SATA3 / M.2
• RAID Support via - SATA
• Storage Mode Support:
• AHCI
• Hot Plug
• NCQ
• NVMe Boot (via M.2 PCIe Slot)
• NVMe Boot (via PCIe 4.0 Slot)
• RAID 0
• RAID 1
• RAID 10
• Internal I/O:
• 1 x 24-pin (Power)
• 1 x 4-pin CPU Fan Connector
• 1 x 4-pin CPU OPT Fan Connector
• 3 x 4-pin System Fan Connector
• 1 x 8-pin (Power)
• 1 x Addressable Digital RGB Header
• 1 x AMD LED Fan USB Header
• 1 x Front Panel Audio Header
• 1 x Power LED / Speaker Header
• 2 x RGB Header
• 8 x SATA III - 6Gb/s
• 1 x Serial (COM) Header
• 1 x Thunderbolt AIC Connector (5-pin)
• 1 x TPM (SPI_TPM) header
• 1 x TPM Header
• 1 x USB 2.0 Header
• 2 x USB 3.2 Gen1 Header
• Network Interface Type - Wired Gigabit LAN (10/100/1000)
• Network Chip/Modules - 1 x Intel® I211AT (Gigabit LAN)
• Rear I/O Connectors:
• 1 x DisplayPort 1.2
• 1 x Front Speaker Out
• 1 x HDMI 1.4
• 1 x Line In
• 1 x Mic-In
• 1 x PS/2 Keyboard/Mouse Combo
• 1 x RJ-45
• 6 x USB 3.2 Gen1 Type-A
• 1 x USB 3.2 Gen2 Type-A
• 1 x USB 3.2 Gen2 Type-C
• 3 x Wi-Fi antenna connector holes (on I/O shield)